The modular design of the CERA~DUR 1 SERIES offers unmatched flexibility.
CERA~DUR 1 Series
Finally a cost effective ceramic hollow fiber alternative to 1″ PVDF tubular modules!
The Cera~Dur 1 Series is the most cost effective Ceramic Hollow fiber solution in the market today!
Along with the typical benefits of higher temperatures and chemical resistance that ceramics offer, the CERA~DUR 1 SERIES provides:
- Lower capital and OPEX costs
- Modular design options for easy installation and maintenance.
- Higher flux vs. polymer membranes
- Able to handle aggressive wastewaters; up to 100,000 ppm TSS, 20,000 ppm COD and 5,000 ppm oil.
Our ceramic hollow fiber membranes deliver stable flux and high-quality product water for disposal/reuse with <1 ppm TSS, <500 ppm COD and <5 ppm oil.
If you are interested in learning more about the availability of our new Cera~Dur 1 Series solution, please give us a call or send us an email.
Our team look forward to assisting you on your project!
Modular and Adaptable
Our hollow fiber membranes are very easy to clean and do not require much chemicals. A quick periodic backwash to remove the fouling layers will improve performance and extend the operating lifetime of our membranes. The ability to achieve high packing density in a single module allows us to offer a greater filtration area than other membranes. Our hollow fiber membrane modules are used to filter large volumes of wastewater utilizing minimal space and energy.
From Nanofiltration to Microfiltration
We extended our ceramic hollow fiber membrane portfolio to suit specific filtration needs covering nanofiltration, ultrafiltration and microfiltration.
In addition to our standard 30 nm pore size, we now offer 3 nm, 10 nm, 80 nm, 100 nm, 130 nm and 700 nm pore sizes.
Our clean water permeability ranges from 60 to 14,000 LMH at 1 bar depending on the pore size.
Crossflow in-out filtration
Our crossflow in-out filtration offers long operating cycles by increasing the shear force to remove fouling layers and high recovery of membrane performance with less cleaning cycles and chemicals.
Recommended Operating Parameters
Feed Circulation Flow: 9-27 LPM (2.5-8 GPM)
Operating TMP: 3.0 bar Max (43 psi)
Operating temperature: 5 to 40 °C (40 to 105°F)
pH Range (continuous): 2 – 10 at 40 °C (105 °F)
Permeate Back Pressure: 0.3 bar (5 psi)
Inlet Pressure: 4.8 bar Max (70 psi)
Structure: Hollow fiber
Pore size (D90): 3, 10, 30, 80, 100, 130, 700 nm
Filtration area: 0.17 m² (1.8 ft²)
Housing material: PVC
Housing diameter: 2.54 cm (1″)
Flow Type: Inside -out
Backwash Flow: 20-40 LPM (5-10 GPM)
Duration: 5-15 seconds
Typical Frequency: Every 20-30 minutes
Back-wash pressure: 2.0-3.5 bar (30-50 psi)
Chemically Enhanced Backwash (CEB)
Typical Frequency: Every 2-4 weeks
Duration: 1-2 hours
Chemicals (Typical): NaOCI, NaOH, Citric Acid
GET IT NOW